Oyaide OCB-1 Exs
Name of product | OCB-1 EXs |
Outlet plug talkative | Four |
Cable portion | L / i50 EX (OFC2.0SQX4 core star quad lines, silicone insulation, aramid fiber reinforced intervention, blue Tetoron sleeve) |
Cable armor | Tetoronsuri - Breakfast (inside) + PET sleeve (Outside: Blue) |
Power plug | P-037 |
Outlet | Original outlet SWO-DX-ULTIMO (yellow cover) |
Internal wiring | 4N2mm sterling silver line (skin-pass processing) |
Outer diameter | W120 × L120 × H60 (case only, not including the legs) |
mass | 830g |
Cable length | 2.0m |
Rating | 125V / 15 PSE certified product |
Body
Tap body is based on the engineering plastics material "PBT GF30%" with high rigidity, it has compounded with carbon considering EMI. In addition, the structure employs a monocoque structure, fixed outlet launched the four post from the bottom, and then transmitted directly to the chassis base is the vibration. In addition, the body wall thickness compared to conventional products (PVC 2.8mm), it has been improved rigidity and 1.2mm thick 4mm. By this complex element, distorted sense of a decrease, became the sound quality with extremely high S / N sense of transparency due to the effect of carbon.Other features, by issuing a foot diameter 13mm at the bottom, to reduce the contact area between the floor and the body to minimize resonance. Also, offer a brass spike anti-vibration rubber set in the optional parts, allows you to your favorite tone control.
It tells the vibration that post that launched from the bottom surface is generated from the electrical outlet on the bottom.
Offer a wide variety of optional accessories.
The new model stability and sound quality to further improve the installation (Ver.2012).
To the four corners of the bottom, OCB-1 series Ver2012 the screws can be fixed only option spike OSP-SC or OSP-SS. By using these spikes, effectively attenuates the transmission of vibrations from the floor surface, such as reduction of bleeding of the high-frequency, views further improved sound quality.
It should be noted, Ver2012 previous model, because it does not have a threaded hole is provided on the bottom surface, please use the OSP of Paste type.
Brass spike OSP-SC the screws fixed state. The four corners of the OCB-1Ver2012, OSP-SC and has M4 threaded hole is provided for set screws, can be installed to play without high precision OSP-SC.
Brass spike OSP-SC the screws fixed state.
Stainless steel spike OSP-SS the screws fixed state.
Stainless steel spike OSP-SS the screws fixed state.
OCB-1 series Ver2012 the screws can be fixed only option granite base OCB-BS. Stable installation even if the power cable was connected to a large number is possible, be to shut out the transmission of vibration from the floor, offer further improvement in sound quality.
The OCB-1 series Ver2012, M4 screw holes stop is possible fixing screws a multi-base insulator INS-BS using. In that case, please purchase the M4 screws of about 6 ~ 10mm (recommended truss or Nabeneji) separately home center and the like.
Internal crossover wiring tailored to the grade
Of the cross wiring between the electrical outlet, 6N2mm according to grade single line (ST), the line than 6N2sq (DXs), using 4N 2mm silver line (EXs) worked to homogenization of each primary and secondary outlet sound quality.
Mitigation of contact loss
Compared to the power strip (cable body separation type), 3-point contact for that plug directly into the wall outlet power cord (power plug - inlet - wiring) is the biggest advantage of the little table tap. In addition, although I think whether you have the experience, such as a large tone change by a cable to connect it to purchase a power strip, in the case of our company, "OCB-1", because the cable and the tap body has become an integral structure you can put together in a so-called "ELEC sound" from a wall outlet to the outlet.
Using the electromagnetic wave absorber (EXs)
Contact portion of the plug and outlet will generate a noise disturbed magnetic field. Then paste the electromagnetic wave absorber to the outlet body, also, paste the electromagnetic wave absorber on the bottom part is in the chassis, it will absorb the stray noise.
Original plug use (EXs, DXs)
Was standard equipped with a "P-029" to DXs to OCB-1EXs the original power plug "P-037". This is not extremely distorted, we were able to get a high-speed, high-quality of the tone in the high resolution.
cable
The OCB-1 EXs L / i50EX (oxygen-free copper wire, reinforced silicon, carbon sleeve) use the