Dual monocoque housing

Because it is simple it must be built precisely. This is also the philosophy of Oyaide electricity, is also the craftsmanship.While each claims the individuality of the materials used, creating a harmony in a wonderful degree, we will finish the F1 / M1 to the ultimate product. The inner housing, and excellent mechanical properties, adopt a POM (polyacetal) that combines electrical insulation properties.

The outer housing has adopted a 50-based aluminum alloy having a balanced mechanical properties of the balance. These are cut by the NC machining from bar material of the outer 40mm, in order to make one of the parts, it is indeed the 80% to 85% is for the waste disposal. (POM90g → 20g / aluminum 190g → 25g) In addition, the fitting of the parts that have been created by the outstanding cutting accuracy is not even an inch of deviation. Craftsmanship Japan is proud of has been handed down.

Body (electrode portion)

The body of the material F1 / M1 combines excellent mechanical properties and electrical insulation properties, use a high-density engineering plastic material PBT + GF30%. Body of high rigidity, has achieved a high-speed vibration damping. In addition, all of the screws P / C is made of stainless steel, completely original bis was made in F1 / M1 only. High stainless steel screw rigidity is too much torque, screw mountain collapse, there is no trouble such as the head can be taken. Also, the maximum cable attachment size is proud of the outstanding workability 10sq (5.5sq × 2 pcs.). Tensile strength of the blade receiving portion and the cable in the 30kg or more, there is no such thing as coming missing also a little pull. This is also a result of sufficient consideration of the safety.

The F1 / M1 is the outstanding performance and excellent flagship model that combines safety. Housing of F1 / M1 is not only its excellent design. Design is on the extension of the function, the pair eating rare Naru beauty was born necessarily sexual. Inner housing, its excellent electrical insulation properties, adopt a POM with higher mechanical properties are also referred to as the second metal. Body of high rigidity, has achieved a high-speed vibration damping. Connection part is easy to disturbance of the magnetic field is generated, also is vulnerable to external noise. So the outer cover, adopting the aluminum to increase noise immunity. The combination of this material, as well as realize the S / N ratio of at a high level, and contribute to the attenuation of unwanted vibration.

Large-diameter cable outlets adopted that can cope with very thick cable

When you own a power cable, wind or butyl for the purpose of damping, or there is no experience that has become catapult thick using the noise cut-off tape, and the like? This product is so designed to be used with confidence to such customers, rear cable insertion opening corresponds to the maximum outside diameter of 17mm cable.

Adopt a platinum + palladium plating on beryllium copper electrode

The electrode material of F1 / M1, employs a beryllium copper with a strong holding force. The plating of the electrode, thoroughly test the plating dozens type, select a combination worthy of the flagship model of platinum + palladium. The first layer of platinum is 0.5μ, 2 layer of palladium was applied at a thickness of 0.3μ. In order to finish the F1 / M1 to the ultimate product is, you start from the underlying process of plating of the electrode. Material that has been punched as parts, mechanically is barrel polishing and then, by the hand of man and subjected to one one buffing. Example in which the polishing process was applied as for audio over these 2 degrees is not unparalleled. Mirror finish, and Dairekumekki.

Because it is simple it must be built precisely. Here too, and the philosophy of Oyaide electricity, I craftsmanship it has been condensed.