body

• 30% glass filler filled PBT high-rigidity body

The resin constituting the body, adopted the glass filler-containing PBT 30%, which was superior to the high rigidity and durability and vibration proof. Shows the excellent heat resistance to heat during soldering, the deformation and damage of the resin is less likely to occur, it is easy to soldering compared to the general inlet.

• It can be attached to common inlet mounting hole

Dimensions are the same as that of the conventional IEC320 inlet (external type), common inlet mounting holes (20x27.5 R4) to the built-in, 3mm diameter Nabeneji (M3 Nabeneji etc) can be fixed in two.

Blade (electrode)

• High precision Kezuki from phosphor bronze plate

Blade is not a typical brass stamping, molding by cutting precision from phosphor bronze plate switching. Metal stress is less likely to occur in the blade as compared to the press molding, distortion effect on the sound quality has been greatly reduced. Also phosphor bronze is a high-performance material that is well-established in our company such as steel outlet or power plug, an example which has been adopted in the inlet will be the world's first is Power Inlet R.

Power Inret R electrode (before plating)

Mirror-finished by hand polish

External exposure side of the cutting blade is mirror-finished and polished by hand-polished by buffing craftsman. This can the fitting of the IEC connector electrode more smoothly, contributing to the conduction improvement. On the other hand, the inner side of the blade is to be that there is no Eaete polishing, leaving a moderate irregularities, it was well the bite of the solder.

Platinum + 2-layer plating by palladium

The blade of the plating has undergone a two-layer plating by platinum + palladium. Power Inlet in the development of R is to create anew a number of plating prototype. Repeated many of the audition, it was washed out the optimal plating pattern to Power Inlet R. As a result, Power Inlet plating was carefully selected for R is, it was a platinum + palladium which is also used to top model F1 / M1 of our superlative outlet R1 and power plug / IEC connector. This higher inlet which has been subjected to luxurious plating does not look at an example to others.

Possible fitting the Faston terminal in the wide type of blade shape

The inner side of the blade, friendly usability, was made wide type compared with the conventional inlet. As a result, in addition to conventional soldering wiring, can be easily mounted in the internal wiring by Faston terminal (F6.35), it was to ensure the contact area of ​​the maximum and the internal wiring. On the other hand, when performing the conventional soldering, by a blade inside side is wider, the soldering is easy to carry out, when to particular branch lines a plurality of internal wires from the inlet, has remarkably improved workability . Also, dare by you did not adopt the screws fixing of the internal wiring, eliminating the risk of bad contact due to a screw loose. We have to ensure the long-term safety.

Power Inret R back

Wide type blade Faston terminal that can be fitted

The blade internal side of the, was provided with a round hole of large φ2.6 than conventional inlet. As a result, the twisted wires of up to 3.5 Scare, or can be passed through a single line of up to φ2.6, was made possible a more robust mounting at the time of soldering.v