Oyaide OCB-1 SX V2
Name of product | OCB-1 SX V2 |
Outlet plug talkative | Four |
Cable portion | BLACK MAMBA V2 (precision conductor 102SSC, 3.5SQ × 3 core cabtire structure) |
Cable armor | PET mesh sleeve (black) |
Power plug | P-029 SPECIAL EDITTION (brass mirror buffing electrode) |
Outlet | SWO-NT SPECIAL EDITTION (phosphor bronze mirror buffing electrode) |
Internal wiring | OFC2.0mm single wire |
Outer diameter | W120 × L120 × H60 (case only, not including the legs) |
mass | 830g |
Cable length | 2.0m |
Rating | 125V / 15 PSE certified product |
Adopt a precise conductor "102 SSC" proud of ELEC electricity
- The conductor of the cable portion "BlackMamba V2" have precise conductor 102 SSC is employed to proud of ELEC electricity.
- To avoid inclusion of impurities as much as possible, using only virgin copper containing no recycled copper among the copper conforming to JIS C1011.
- Annealing processing over 2 degrees, eliminating the mechanical stress-strain of the strand.
- Product management and thorough manufacturing control numerical value, maintenance, and shipping dates. Conductivity is achieved 102.3% IACS of the highest class.
※ For more information about the precise conductor "102SSC" is here please visit.
Adoption ELEC was amassing the latest power transmission technology to "BLACK MAMBA V2" to the cable portion
The cable portion was gathered the latest power transmission technology ELEC "BlackMamba V2" the adoption. It provides a high-power transmission that the withstand voltage 600V up to 20 amps, an aggressive response. By short pitch strand wire twisted in the usual 1.15 times of tension, eliminating the random gap in the conductor, you have to suppress the sound quality deterioration due to the line-to-line distortion. I was paying close attention to the insulator and conductor adhesion rate. Uniformly brought into close contact with the insulator and the conductor, to eliminate the random gap, we eliminate degradation of sound quality due to the line distortion. The insulating coating of the conductor uses the excellent high molecular polyolefin in electrical characteristics. Dielectric constant than ordinary PVC insulation can exhibit an extremely low value of 1/4, to reduce signal loss, it has been obtained turbidity less reproduced sound. In addition, the internal intervention, by BLACK MAMBA V2 adopted conductor flex PE yarn that has been designed specifically to 20A corresponding 3.5sq, powerful sound clear. Insulator high molecular polyolefin material, internal intervention is to place a low dielectric constant flex PE in geometric, damping the unwanted vibration. The equipment and the drain wire the copper foil shield, which boasts a 100% shielding rate, noise is also thorough. The exterior sheath, adopted the audio-only halogen-free sheath with a unique damping characteristics and electrical characteristics to the other. The cable sheathing covering the PET mesh sleeve (black), we are strengthening the vibration damping.
Fitted with a mirror surface buffing non-plated electrode to power plug-outlet
The power plug fitted with a P / C-029 SPECIAL EDITION (mirror buffing electrode). The outlet built-in SWO-NT SPECIAL EDITION (mirror buffing electrode). Outlet / plug of the electrode has to embody the original sound material to discharge the plating. After outlet / plug of the electrode is that barrel polishing, it is one by one buff polished mirror-finished by hand of the craftsman.
High rigidity case that employs a monocoque method
Case material is based on a high-rigidity engineering plastic material "PBT GF30%", eliminating the EMI noise blended with carbon. The case structure employs a monocoque system, is a high-rigidity design which has a thickness of 4mm ones thickness. Outlet firmly fixed to the strut, which launched from the case in the bottom, quick propagation and damping vibrations to the case side. It provided leg portions of 13mm diameter casing bottom corner, to reduce the contact area between the floor surface and the body, and suppressing the resonance of the installation site.
OCB-1 can be fixed a dedicated optional accessories
The leg is provided with a M4 screw hole, the option item (OSP-SC / OSP-SS / OCB-BS / INS-BS) You are screwing can be fixed. By shutting out the transmission of vibration from the floor, it offers further improvement in sound quality.
OCB-1 series Ver2012 the screws can be fixed only option granite base OCB-BS. Stable installation even if the power cable was connected to a large number is possible, be to shut out the transmission of vibration from the floor, offer further improvement in sound quality.
The OCB-1 series Ver2012, M4 screw holes stop is possible fixing screws a multi-base insulator INS-BS using. In that case, please purchase the M4 screws of about 6 ~ 10mm (recommended truss or Nabeneji) separately home center and the like.