卡達聲 Chassis wires
Cardas Chassis Wire
All Cardas chassis wires use multi-stranded copper in a colored jacket.
NOTE: Cardas manufactures Litz conductors. These conductors have an enamel coating on each strand that must be removed. This is best achieved using flux and a solder pot to tin the ends. This page features a video showing this technique. Failure to properly tin the wires will result in a conductor that does not perform correctly.
As an added measure of quality control, the enaml coating on a portion of our copper strands is dyed a specific color, according to gauge. This enables us to verify that each conductor is properly constructed. A production run of any given Cardas chassis wire or bulk cable may contain copper strands with both clear and dyed enamel coating. The dye has no effect on the conductor's performance.
33 awg Tone Arm
33 awg X 4 with shield
34x4 Clear Tonearm Cable
34x2 Clear Tonearm Cable
34 awg Clear Tonearm Cable
26.5 awg Chassis Wire
23.5 awg Chassis Wire
21.5 awg Chassis Wire
20.5 awg Chassis Wire
19.5 awg Chassis Wire
18.5 awg Chassis Wire
17.5 awg Chassis Wire
15.5 awg Chassis Wire
11.5 awg Chassis Wire
9.5 awg Chassis Wire
1 X 21.5 awg Coax
2 X 24 awg
2 X 23.5 awg with shield
2 X 21.5 awg with shield
3 X 20.5 awg twisted triad
3 X 10 awg in-wall power
4 X 24 awg with shield
20 awg X 2 twisted pair with jacket
15 awg X 2 twisted pair with jacket
11 awg X 2 twisted pair with jacket
20.5 awg taped
11.5 awg taped
11 awg X 2 taped
11 awg X 4 taped
Cardas Bulk Cables
A cable contains one or more conductors, may or may not include a shield and/or other materials (PTFE tape, cotton dielectric, etc.), and has an outer jacket.
Bulk Cable refers to cable we sell by the foot, without any termination or preparation. Short lengths are coiled & placed in a bag. Longer lengths are sold on a spool.
This list shows all of the bulk cables we have available.
Hover your mouse over each cable to zoom in.
Use your mouse's scroll wheel to control zoom.