Cardas Chassis Wire

 

All Cardas chassis wires use multi-stranded copper in a colored jacket.

NOTE: Cardas manufactures Litz conductors. These conductors have an enamel coating on each strand that must be removed. This is best achieved using flux and a solder pot to tin the ends. This page features a video showing this technique. Failure to properly tin the wires will result in a conductor that does not perform correctly.

As an added measure of quality control, the enaml coating on a portion of our copper strands is dyed a specific color, according to gauge. This enables us to verify that each conductor is properly constructed. A production run of any given Cardas chassis wire or bulk cable may contain copper strands with both clear and dyed enamel coating. The dye has no effect on the conductor's performance. 
 

 

33 awg Tone Arm

33 awg X 4 with shield

34x4 Clear Tonearm Cable

34x2 Clear Tonearm Cable

34 awg Clear Tonearm Cable

26.5 awg Chassis Wire

23.5 awg Chassis Wire

21.5 awg Chassis Wire

20.5 awg Chassis Wire

19.5 awg Chassis Wire

18.5 awg Chassis Wire

17.5 awg Chassis Wire

15.5 awg Chassis Wire

11.5 awg Chassis Wire

9.5 awg Chassis Wire

1 X 21.5 awg Coax

2 X 24 awg

2 X 23.5 awg with shield

2 X 21.5 awg with shield

3 X 20.5 awg twisted triad

3 X 10 awg in-wall power

4 X 24 awg with shield

20 awg X 2 twisted pair with jacket

15 awg X 2 twisted pair with jacket

11 awg X 2 twisted pair with jacket

20.5 awg taped

11.5 awg taped

11 awg X 2 taped

11 awg X 4 taped