123

TUNAMI II SP-Y V2

Name of product TUNAMI II SP-Y V2 (Y lag specification speaker cable)
Cable structure 2 core cab tire
Cable conductor 102SSC (hot / cold)
Wire diameter 5.5SQ (69 this /0.32mm)
Cable insulator High molecular polyolefin
Cable shield One layer - electromagnetic wave absorber (amorphous polyolefin) 2-layer - semiconductor (carbon-containing compound) 3-layer - copper foil tape (drain wire Yes)
Cable armor Polyurethane
Cable outer diameter 14.0mm
Terminal Y lug (SPSL) screwing joining purely domestic copper alloy (RoHS compatible) sterling silver plated in cutting the body portion (1.5μ) + platinum plating (0.3μ)
Branch Aluminum round bar cutting products (branch stabilizer having a damping function)

 

Adopt a precise conductor "102 SSC" proud of ELEC electricity.

  • Use only virgin copper to avoid contamination of impurities as much as possible does not contain any recycled copper among the copper conforming to JIS C1011.
  • 100% removal of the impurities adhering to the surface by performing peeling process.
  • To facilitate the flow of electrical signal flowing through the conductor surface layer, thinned with natural diamond dies, improve the surface smoothness of the strand.
  • It thinned wire by the machining accuracy of the standard error tolerance ± 8μm far surpass ± 1μm a.
  • In twisted stroke, it adopted the world's first high-density different 径導 body 3E twisted structure (patented learning). Increase the density and roundness of strands, stabilize the electric characteristics.
  • Annealing processing over 2 degrees, eliminating the mechanical stress-strain of the strand.
  • Product management and thorough manufacturing control numerical value, maintenance, and shipping dates. Conductivity is achieved 102.3% IACS of the highest class.

※ For more information about the precise conductor "102SSC" is here please visit.

A conductor area 5.5SQ margin, withstand voltage 600V maximum 30 amps even though the high-power transmission.

It provides a high-power transmission that the withstand voltage 600V up to 30 amps, an aggressive response. By short pitch strand wire twisted in the usual 1.15 times of tension, eliminating the random gap in the conductor, you have to suppress the sound quality deterioration due to the line-to-line distortion. I was paying close attention to the insulator and conductor adhesion rate. Uniformly brought into close contact with the insulator and the conductor, to eliminate the random gap, we eliminate degradation of sound quality due to the line distortion.

 

Excellent high molecular polyolefin in electrical characteristics used for the insulation, reducing the signal loss.

The insulating coating of the conductor uses the excellent high molecular polyolefin in electrical characteristics. Dielectric constant than ordinary PVC insulation can exhibit an extremely low value of 1/4, to reduce signal loss, it has been obtained turbidity less reproduced sound. In addition, by using a different polymer polyolefin material external / internal, respectively, and has prevented the influence on the sound due to the resonance.

3 layer shielding by the electromagnetic wave absorber / carbon layer / copper foil, the ultimate noise protection.

First layer: the electromagnetic wave absorber / second layer: carbon layer / third layer: adopt a three-layer shielding by copper foil. Electromagnetic waves caused by disturbance of the magnetic flux that inevitably occur in the first layer, will be converted into thermal energy by mixing the electromagnetic wave absorber in the compound. Weak vibration is generated when electricity flows in the cable, the material is charged static electricity and the corona discharge by the vibration. Thus, the second layer providing a semiconductor layer (carbon layer), prompts the release of static electricity without that conductor affect. The third layer providing a copper tape shield, protect the conductor from external noise. In addition, the copper foil shield is close drain wire, by joining to earth ground, it succeeded in enhancing a more S / N ratio. External noise is a matter of course, internally generated noise, shut out at a high level even spark noise caused by vibration. Ultimate noise protection, please experience the power of 3-layer shield.

ELEC mounted original Y lug "SPSL"

Left and right on both terminal a total of 8 points, silver / platinum-plated Y rug proud of Oyaide electrical "SPSL" has been installed. Material does not contain lead and iron, adopt a purely domestic copper alloy of RoHS compliant as a base. It has been cutting in the NC machining from a round bar with a diameter of 15mm. Distal end insertion portion, two-step shape of 6 mm · 8 mm to fit a wide range speaker terminal. Body is carefully buffing by hand, it will be subjected to a mirror-base processing. Body that has been polished until perfect, it is finished by 2-layer plated sterling silver + platinum. This highly original 2-layer plating, the sound will not exude the elegant atmosphere as well "SPSL" in high-quality.

The cable as "SPSL", have been joined by a screw tightening that has been torque management. In addition, also serves as the anti-oxidation of the durability and the conductor, completely sealing the periphery of the plug and cable with tough heat shrink tubing with excellent gas barrier properties. This heat shrink tubing has a high transparency, the design features brilliant blue stainless steel screw, which is also the appearance of "SPSL", we can glimpse in the terminal. For more information about "SPSL" here please visit.

Original parts that have been developed only for tough branch stabilizer machined aluminum round bar of branch stabilizer aluminum and high-precision cutting in the NC machining is "TUNAMI II SP-Y V2". "TUNAMI NIGO V2" has been perfectly matched to the design dimensions of, this precision parts, strictly using the fine screws are torque management, stable mount by the contact multi-point of even cable section and a six. Womotte vibration-damping properties of its mass and aluminum, "TUNAMI II SP-Y V2" is I got form the completion of the high-end speaker cables that can be our hope.