123

Oyaide BLACKMAMBA-Σ V2

Name of product BLACK MAMBA-Σ V2
Cable portion BLACK MAMBA-Σ V2 (1.8m)
Cable structure 3 cabtyre
Cable conductor 102 SSC (hot / cold) + OFC (earth)
Cable conductor cross-sectional area 3.5SQ (45 this /0.32mm)
Drain wire OFC0.75sq (30 this /0.18mm)
Cable insulator High molecular polyolefin
Cable shield Copper foil tape
Cable exterior sheath Audio-only halogen-free sheath (inside) + quartz glass sleeve (outside)
Cable outer diameter 11.8mm
Power plug & IEC connector P / C-004 SPECIAL EDITION
Electrode material and plating Beryllium copper buffing electrode / copper-free
Rating 125V / 15A E certified product

Adopt a precise conductor "102 SSC" proud of ELEC electricity

  • The cable portion, has a precision conductor 102SSC, adopted the "BlackMamba V2", which gathered the ELEC latest power transmission technology.
  • To avoid inclusion of impurities as much as possible, among the copper conforming to JIS C1011 recy-Use only virgin copper containing no cycle copper.
  • 100% removal of the impurities adhering to the surface by performing peeling process.
  • To facilitate the flow of electrical signal flowing through the conductor surface layer, thinned with natural diamond dies, improve the surface smoothness of the strand.
  • It thinned wire by the machining accuracy of the standard error tolerance ± 8μm far surpass ± 1μm a.
  • In stranded wire process, it adopted the world's first high-density different 径導 body 3E twisted structure (patented). Increase the density and roundness of strands, stabilize the electric characteristics.
  • Annealing processing over 2 degrees, eliminating the mechanical stress-strain of the strand.
  • Product management and thorough manufacturing control numerical value, maintenance, and shipping dates. Conductivity is achieved 102.3% IACS of the highest class.

※ For more information about the precise conductor "102SSC" is here please visit.

A conductor cross-sectional area 3.5SQ margin, high-speed, high-power transmission of the withstand voltage 600V up to 20 amps

It provides a high-power transmission that the withstand voltage 600V up to 20 amps, an aggressive response. By short pitch strand wire twisted in the usual 1.15 times of tension, eliminating the random gap in the conductor, you have to suppress the sound quality deterioration due to the line-to-line distortion. I was paying close attention to the insulator and conductor adhesion rate. Uniformly brought into close contact with the insulator and the conductor, to eliminate the random gap, we eliminate degradation of sound quality due to the line distortion.

Excellent high molecular polyolefin in electrical characteristics used for the insulation, reducing the signal loss

The insulating coating of the conductor uses the excellent high molecular polyolefin in electrical characteristics. Dielectric constant than ordinary PVC insulation can exhibit an extremely low value of 1/4, to reduce signal loss, it has been obtained turbidity less reproduced sound. In addition, the internal intervention, adopted flex PE yarn that is designed to BLACK MAMBA V2 only.

Shut out the noise in the shielding by copper foil

Conductor by 20A corresponding 3.5sq, powerful sound clear. Insulator high molecular polyolefin material, internal intervention is to place a low dielectric constant flex PE in geometric, damping the unwanted vibration. The equipment and the drain wire the copper foil shield, which boasts a 100% shielding rate, noise is also thorough.

Quartz glass sleeve (white) coated on the cable sheathing, strengthen the vibration damping

The exterior sheath, adopted the audio-only halogen-free sheath with a unique damping characteristics and electrical characteristics to the other. In addition to the outer shell of the outer sheath, it employs a unique quartz glass sleeving to the other, further enhance the vibration damping. It has achieved a flat sound quality without coloring.

Fitted with a power plug & IEC connector P / C-004 SPECIAL EDITION of the Red body White cover

Power plug · IEC connector of the electrode performs buffing to non-plated beryllium copper blade, was a mirror finish, adopted BLACKMAMBA-Σ exclusive goods. This has earned a loyal and high-resolution acoustic characteristics to the original sound. Also included in the outer shell, adopt a polycarbonate that boasts outstanding mechanical strength even in the resin. The neutrality of sound was to aspirin white color in the image of a wide band. Further color ring the plug body in red with the motif of the Japanese flag. It symbolizes the pride of a "Made in Japan".