housing

Material

"R-1" has inherited the basic exterior design of the "SWO-ULTIMO SERIES". However, the front face was in response to the needs to adopt the shape of 20A · 15A shared growing.

Combines excellent mechanical properties and electrical insulating properties to the body, high-density engineering plastic material PBT + GF30% of the input. High specific gravity, the body of high rigidity has been enhanced further braking ability.In addition, increase the processing accuracy of the body, blade (electrode) portion and the body increases the adhesion, to minimize the occurrence of unnecessary vibration. In addition, the internal structure layout will simulate the load distribution, has given the identity of the only "R-1".

band

Because it is simple it must be built precisely. This is also the philosophy of Oyaide electricity, is also the craftsmanship. Of course, it is not a mounting bracket one very exception of the body. 1.5mm thickness brass band has an outstanding strength, and protect the feedback of unwanted vibrations from the wall. And outstanding sense of stability, confidence. The "R-1" is referred to as a true Ekusurushibu is, make up while verifying the one one of these parts, it is because craftsmanship Oyaide electricity is alive.

 

Screw joint

Safety was excellent and outstanding performance as "R-1", is the evolution-based model of the SWO ULTIMO that combines workability. All of the screws with the stainless steel screws. High stainless steel screw rigidity is too much torque, screw mountain collapse, there is no trouble such as the head can be taken. Also, the maximum cable attachment size is proud of the outstanding workability 5.5sq. Tensile strength of the blade receiving portion and the cable is ,, there is no such thing as coming missing also pulling a little at 30kg or more. This is also a result of sufficient consideration of the safety.

Electrical Safety Act to clear, is also pending the United States UL safety standard (9/07 'now). In addition, all of the members to be used in an environment surfaces use the material that was to clear the European Rods directive. High sound quality and usability. These were fused at a high level "R-1". Here also, I philosophy of the audio power supply accessories of Oyaide electricity has been handed down.

Blade receiving part

plating

In order to finish the "R-1" to the ultimate product is, you start from the underlying process of plating. Material that has been punched as parts, mechanically is barrel polishing and then, by the hand of man and subjected to one one buffing. Example in which the polishing process was applied as for audio over these 2 degrees is not unparalleled.

Is already proven in the "R-1", select a combination of platinum + palladium.Thoroughly test the plating dozens kind, the first layer of platinum is 0.5μ, 2 layer of palladium was applied at a thickness of 0.3μ. Mirror finish, and direct plating. Because it is simple it must be built precisely. Here too, and the philosophy of Oyaide electricity, I craftsmanship it has been condensed.

It is, through without repeated listening test time and again, ELEC own combination-plating which was established as each personality. Furthermore, buff-polishing process. They are, I tell the excitement never tasted before.

 

Material and shape

Already proved its performance by the power plug / connector "M1, F1", it employs a beryllium copper. Has high conductivity, and sufficient mechanical properties indicates the character that combines, realizing reduction and loss-free transmission of vibration of the joint.

A blade with a thickness of 1.0mm, was to reduce the current resistance. In addition, significantly enhanced also the holding force. Has a contact area and the rigidity of the high-level, realize a strong hold sense of weighted weight 8kg or more. This achieved a reduction and loss-free transmission of vibration of the junction.