Blade receiving part

• plating

In order to finish the "C-237/246/279" to the ultimate product is, you start from the underlying process of plating. Material that has been punched as parts, mechanically is barrel polishing and then, by the hand of man and subjected to one one buffing. Example in which the polishing process was applied as for audio over these 2 degrees is not unparalleled. Mirror finish, and direct plating. Because it is simple it must be built precisely. Here too, and the philosophy of Oyaide electricity, I craftsmanship it has been condensed.　

It is, through without repeated listening test time and again, ELEC own combination-plating which was established as each personality. Furthermore, buff-polishing process. They are, I tell the excitement never tasted before.

• Wide contact area (IEC)

Blade receiving portion in contact with the inlet, using the 1.4mm thickness phosphor bronze. This achieved a strong sense of holding. Load weight is also usually 3 ~ 5kg, but will retain the plug with a force greater than 7kg. And more difficult to pull it out, is a plug that can be used with confidence not budge even a little vibration.

• Contact to withstand tensile load of 30kg

Tensile strength of the blade receiving portion and the cable is not such thing as coming missing also a little tension in the 30kg or more. This also is the result of careful consideration of the safety.

body

• GF + PBT body

"C-237/246/279" combines excellent mechanical properties and electrical insulating properties to the body of, using a high-density engineering plastic material PBT + GF30%. Body of high rigidity, has achieved a high-speed vibration damping. In addition, all of the screw is completely original screws made in P / C-only in stainless steel. High stainless steel screw rigidity is too much torque, screw mountain collapse, there is no trouble such as the head can be taken. Also, the maximum cable attachment size is proud of the outstanding workability 10sq (5.5sq × 2 pcs.). Tensile strength of the blade receiving portion and the cable in the 30kg or more, there is no such thing as coming missing also a little pull. This is also a result of sufficient consideration of the safety.

• High rigidity Polycarbonate

The body cover, we used the thickness Polycarbonate. Selection of this material is its strength and hardness. Weak vibration response soon dampen, there is no Tameibitsu sense of enhanced rigidity.