And each one of the parts are combined, in one of the power plug

Material and materials

The electrode of the P / C-004 (blade), the same as the F 1 / M 1, having a high conductivity, and sufficient Beryllium copper has both mechanical properties. The choice of flag suitable for ship-model material. In addition, beryllium copper, an alloy rich in extremely aging property, was to have a very high mechanical properties by heat treatment. The blade thickness 1.0mm, has a contact area and the rigidity of the high level of width 6.0mm, realized a strong hold sense of weighted weight 8kg or more. This achieved a reduction and loss-free transmission of vibration of the junction.

Each one polished is the plating process by craftsmen

The P / C-004 of the electrode (blade), the same as the F1 / M1, thoroughly test the plating dozens type, select a combination worthy of the flagship model of platinum + palladium. The first layer of platinum is 0.5μ, 2 layer of palladium was applied at a thickness of 0.3μ.

Material that has been punched as parts, mechanically is barrel polishing and then, by the hand of man and subjected to one one buffing. Example in which the polishing process was applied as for audio over these 2 degrees is not unparalleled.Mirror finish, and direct plating. Because it is simple it must be built precisely. Here too, and the philosophy of Oyaide electricity, I craftsmanship it has been condensed.

Selection without compromise is not the only electrode portion parts

Non-magnetic stainless steel screws commitment pulled from one

Commitment ELEC product sticks from one screw. 
P / C series is a screw that is used to is, P / C series-made custom-made stainless steel screws for, non-magnetic material is also, of course, by the fine thread pitch, body and cover it took a lot of the area of contact. 
As a result the body and the cover is hard to distortion, also it has a making pile loose screws.

In addition to too much torque, or there is no experience that had crushed a thread? Because you are using all screws class stainless steel that is used in our plug, screw mountain to collapse even if too much torque, there is no such head can be taken. In addition, because stainless steel itself non-magnetic material, we will provide a high sound with S / N without ObiShigeru in the connector part.

GF + PBT body

The body of the P / C-004, excellent combine the mechanical properties and electrical insulation properties, use a high-density engineering plastic material PBT + GF30%. Body of high rigidity, has achieved a high-speed vibration damping. In addition, all of the screw is completely original screws made in P / C series and F1 / M1-only in stainless steel. High stainless steel screw rigidity is too much torque, screw mountain collapse, there is no trouble such as the head can be taken. Also, the maximum cable attachment size is proud of the outstanding workability 10sq (5.5sq × 2 pcs.). Tensile strength of the blade receiving portion and the cable in the 30kg or more, there is no such thing as coming missing also a little pull. This is also a result of sufficient consideration of the safety.

High rigidity Polycarbonate

The body cover, we used the thickness Polycarbonate. Selection of this material is its strength and hardness. Weak vibration response soon dampen, there is no Tameibitsu sense of enhanced rigidity.

Cable adaptation outside diameter

When you own a power cable, wind or butyl for the purpose of vibration control, or there is no experience that has become catapult thick using the noise cut-off tape, and the like? This product is so designed to be used with confidence to such customers, IEC plug, it can corresponding to the maximum outer diameter of 17mm cable to the power plug both. Now, even if has become carelessly thick with tape and seismic processing, and the other peace of mind.

� When you remove the clamper, the cable up to 17mm can be used.

Cable mounting holes

I want only to use a thick cable can be, I want to make! For such customers, cable attachment size can accommodate up to a maximum of 10sq (5.5sq × 2 pcs.) (However permissible current 125V15A)

Management system by serial number with a hologram seal

ELEC electricity P / C (plug / connector) for management in the series, all is stuck the hologram seal with a serial number. In addition, since the factory is a state that went into the original cans case, it will protect the body from impact during transport.