conductor

In the metal in the center conductor, the highest conductivity 5N (99.9995%) use the sterling silver. Also discharges the any compromise in the production process, the continuous casting due to the high frequency electric furnace, 19 steps in between also extends cold rolling, annealing operation over twice, drawing process by the diamond die, performs such as skin-pass processing, silver purity is not only high, we used the "silver wire" there is no gap, high-quality to the grain boundaries.

Semiconductor layer

When the signal flow is weak vibration occurs in the cable, the material is charged static electricity and the corona discharge by the vibration. Therefore, by providing the semiconductor layer on the outer periphery of the insulating layer, it affects the conductor without prompting the release of static electricity.

Insulator

When the signal flow is weak vibration occurs in the cable, the material is charged static electricity and the corona discharge by the vibration. Therefore, by providing the semiconductor layer on the outer periphery of the insulating layer, it affects the conductor without prompting the release of static electricity.

Insulator

The insulator, using the lowest dielectric constant PFA in the insulator. In addition for the purpose of vibration diffusion, adoption of a composite structure of the FPE (foam polyethylene). Only the electrical properties were also makes every possible effort to vibration measures without.

Exterior

Exterior uses only reinforced fiber sleeve to hate simple color ring of material, in order to prevent the charge of static electricity caused by friction, it has undergone a anti-static processing.

Two-layer shield

In order to strengthen respect to the low-frequency noise, but was a combination of copper tape + tin-plated copper braid, "FTVS-510" further also strengthened against the high-frequency noise, high silver-plated copper braid frequency characteristics ( we used the 95%).

Sterling silver center pin use connector

ELEC in an electric considers terminal plugs of cable components. Enhance the conductivity of the cable is that of course, if not also increase the conductivity of the contact of the plug portion, not a true exclusive. By adopting the pure silver contact connector SLSC / SLSB, realize the sterling silver transmission of up to perfect.

Using the acoustic dedicated solder "SS-47"

The soldering of wiring, use the ELEC electricity original acoustic dedicated solder "SS-47". Normal solder purity of the tin from the cost is 99.9% (3N) degree. "SS-47" further discharge the impurities increase the purity to the limit, adopt a high-purity tin that indeed 99.993% (4N) or more. Further improvement of the electric conductivity, are designed to prevent leaching of solder, was blended silver, copper. Moreover, the case of normal alloy solder, silver mixing ratio of is from 3 to 3.5 percent, but "SS-47" is an amazing unsparingly put the amount of 4.7%. In addition, 1.7% compounded the next in high conductivity copper of silver among metals. Conductivity by this compounding ratio is dramatically improved, it succeeded in setting the eutectic point 217 degrees.

Of course, the blending ratio of these, it has not determined only by numerical data and workability. To hit the solder and the inscription for the audio, the sound quality is considered to be appropriate to the highest priority. I was born that "SS-47" of the many times that there is no hearing test a proto model of a variety of blending ratio.