123

MCS-CF

Name of product MCS-CF
Material 1K plain weave carbon FRP
Size 19mm x23mm
Mass 0.5mm / 0.32g, 1.0mm / 0.64g, 1.5mm / 0.96g
Height adjustment From a minimum of 0.5mm up to 3.0mm, 6 stage in 0.5mm increments.
The number of packing Thickness 0.5mm / 1.0mm / 1.5mm total of three pieces of each one
Height pattern 0.5mm / 1.0mm / 1.5mm / 2.0mm (0.5mm + 1.5mm) /2.5mm (1.0mm + 1.5mm) 3.0mm (0.5mm + 1.0mm + 1.5mm)

 

0.5 6 stage in 0.5mm increments until ~ 3.0mm also height adjustable

To accurately trace the record board, while contact with the proper needle pressure needle tip to the face of a board, parallel to you need to Settings (needle pressure adjustment and zero balance adjustment) the tone arm to the face of a board.However, the cartridge has a different height from the top surface for each product until the needle tip. So is the past, it was necessary to perform a height adjustment of the arm every time you replace the cartridge, the work should be understood that very use of the nerve, was extremely difficult, especially following adjustments 1mm. Also, depending on the record player, not lowered the tone arm to the desired position, there was a problem that the low-profile cartridge can not be used in an ideal setting.

With the "MCS-CF", it can be done six steps also height adjustment in 0.5mm increments up to 0.5 ~ 3.0mm, just fit the needle tip of the cartridge in the face of a board. It eliminates the need for adjusting the height of the tone arm on each cartridge *. By keeping sandwich required number in advance "MCS-CF" between your existing cartridge and head shell, you can use immediately the cartridge in the best setting.

After the height adjustment of the tone arm to set the highest cartridge to the needle tip, please sandwich the "MCS-CF" according to the difference of the height of each of the cartridge.

Lightweight carbon the FRP

"MCS-CF" is because it is lightweight carbon FRP made, without breaking the weight balance as in the conventional metal spacers, and Keihari圧 cartridge, you can also use it without difficulty in lightweight cartridge for the tone arm. "MCS-CF" is, by the high-speed vibration treatment with the carbon FRP, high-speed processing of the unnecessary vibration of the cartridge. Eliminates caused by unwanted vibrations incidental sound, dramatically improve the S / N.

Drawer without exhaustive potential of the cartridge, clear sound image will emerge as the fog it was sunny. Flexible height adjustment function and combines the sound quality improvement effect "MCS-CF". Just overturn the common sense of the analog, it is the birth of an innovative cartridge spacer.